Plotting traditional d-I stick diagrams in Excel (alternative view with large screen shots)

PXRD Material Index  Previous Page 

Plotting traditional d-I stick diagrams in Excel

In addition to comparing a measured PXRD pattern with the PXRD pattern of a standard material, comparisons can also be made to databases containing PXRD information. The simplest comparison is one based on peak positions and relative intensities (or heights). Such PXRD data forms part of the:
International Centre for Diffraction Data PDF (=Powder Diffraction File) databases, formerly known as the JCPDS database.

The content and use of these databases is explained elsewhere, but a "traditional" view of the content of a PDF2 database entry is shown below for the material illustrated in these pages, namely calcium phosphate hydroxide more commonly known by its mineral name of hydoxyapatite:

The key point to note is that a crystalline substance is characterised by d-spacing values and not by 2θ values since the latter values depend on the choice of X-rays used to measure the PXRD data, whereas d-spacings are intrinsic to the material and are X-ray wavelength independant. It is very useful to be able to plot this type of data on top of a plot of our measured diffraction data. "Search-match" software provided by the various X-ray diffractometer manufacturers often has this facility built in, but occasionally one may want to generate a similar style plot using Excel. This page shows one how to do this given text-based d-I data such as that created in file 9-432.txt (example file available on UCL Moodle).

The first step is to import the data into Excel, so choose Open and select the text file:

Then choose the option Delimited. Note that the option fixed width can be used for this file, but with great care since the d-spacing values in the first column vary in the number of decimal places provided: smaller d-spacings are quoted with more decimal places than for larger values.

For this text file, I have clicked on both space and comma delimited since a few peaks have been assigned with multiple hkl values separated by a comma:

The database entry saved in the plain text file will appear as seen in the spreadsheet below:

The first empty column should be deleted, the columns of numbers can be formatted with an appropriate number of decimarl places, the column headings set to bold type, and the data then saved as an Excel workbook:

The next step is to move the database data entry to the same workbook as that containing the plot. So under Format on the Home tab, select Move or Copy and then select the Excel file containing your PXRD and plot as shown below (assuming that the file is already open Excel):

Since we do not want to plot d-spacing values on the plot, we need to convert the values in Ångstroms to 2θ values in degrees. Firstly, insert two blank columns after the column of d-spacing values and label the columns as 2θ and, say, Y as shown:

Using Bragg's law &lambda = 2d sinθ, we can now calculate 2&theta values from the d-spacing values:

In the screenshot above, I have used the value 1.54056 Å for the wavelength. Note that it would have been better practice to use the cell identifier (='C05075'!E8 in this set of web pages as seen earlier) which stores the actual value of the wavelength used for the measurement rather than hardwire a new value (and marginally different value!) as seen above.

Then set the values in column Y to zero: the reason for the choice of zero is that we will be drawing the vertical stick markers upwards from the baseline which is set to zero.

The next step is to create scaled intensity values since the ones from the database are scaled to I/I₀, I₀ is the most intense diffraction peak (with values given as percentage). Hence, insert two more columns after I/I₀ and labelled them Scaled and Scale. In the second of these empty columns I have inserted the value 40 since the most intense peak in the PXRD pattern has a count of about 4000. The values in the "Scaled" column can then be set equal to the I/I₀ values multiplied by the scale factor as shown below:

The worksheet should now appear like this with values of 2θ and scaled intensity:

Now return to the chart, right-button mouse click, and choose select data to add further data to the plot. Choose add series and select the data from the 9-432 worksheet that you have just created. For the X values, select the 2θ values and for the Y values, simply select the column labelled Y (containing the zeros). The series name can be set to be the database entry number 9-432 as shown:

Click on OK to return to the Select Data Source menu and this data series should now be listed though no sticks will be visible just yet!

Since the database entry is now a line at the bottom of the plot, it is difficult to select it with the mouse. Return to the worksheet containing the column of zeros and simply set one of the values to a largish non-zero value as shown:

Return to the chart and the data series should now be easy to select using the arbitrary intensity point just created (see below). Then under Chart Tools, select Layout and under the Error Bars dropdown menu, select More Error Bars Options... as shown:

A new menu labelled Format Error Bars should now be visible. Check that it refers to Vertical Error Bars as by default Excel will add-in error bars for both X and Y. Under direction, select Plus and under end style, select No Cap. Finally, under amount select Custom so as to be able to Specify Value:

Choose specify value for the size of the "error" bar (which are going to be the "stick marks" in our plot) and selected the scaled values for intensity that we generated earlier:

After selecting the scaled intensity values for the "error" bar, return to the Format Error Bars menu and choose Line Color and Line Style in turn. In this example, I have chosen blue for the color and 2 pt for the thickness of the vertical sticks:

Blue vertical sticks representing database relative peak intensities are now visible. When preparing the screenshots, Excel added in default X-error bars. These can be selected and deleted with the mouse (right-button click to get the menu to appear):

Finally, select the data series and choose the option Format Data Series... from the menu:

There are several approaches at this point. One is to simply set No line for the data so that only the sticks are visible. This has the disadvantage that no line is visible in the legend for the data series also. An alternative approach is to choose solid line and set the colour to be the same as for the vertical sticks and the line thickness to be the same as that used for the raw diffraction patterns:

Finally, return to the worksheet containing the database entry and reset the Y value previously set to, say, 1000 back to 0. Note that if a solid line has been used to join the database points, this can now be made invisible on the plot by setting all of the Y values to, say, -1 since the minimum of the Y-axis scale is 0. The appearance of the final plot showing both data sets and the ICDD database entry should be as below:

In order to emphasis the meaning of the different colours used in this plot, the legend text has been colour coded to match that of the PXRD patterns and the stick diagram.

PXRD Material Index  Previous Page